ETABS Pier Spandrel LABEL 2.0



Renumber Pier and Spandrel Labels in Just a few Clicks.

Just Download the zip open the Tool

Connect to ETABS

Select the shells use the buttons to assign Pier or Spandrel Labels.

This could save your Hours of work of creating new Pier or SPandrel Labels and then assigning to Shells manually.

Now You have the option to even Assign Pier Labels to Columns.

The Link to Download the zip is Below.

Use your Time for Engineering rather than Labourious Tasks.





To know more about how to use this Tool , Watch this video.

                      

                                                                  Click Here to Download

Comments

Post a Comment

Popular posts from this blog

SAFE Joint Reactions for Pile Supports

Image
This tool is very helpful for the people working with SAFE. Foundations supported on Piles are modelled as spring supports in SAFE with appropriate translational stiffnesses. However the Force developed in these sporings should be limited to the capacities suggested by geotechnical consultants. A pile has a specified Tension , Compression and Lateral capacity. These capacities changes with the Pile Diameter or Length. This tool helps you easily filter the Joint Reactions developed in SAFE so you can look up for the piles exceeding the capacity. Lateral Pile capacity should be compared with the Resultant of Fx and Fy reactions. You can do this easily in this tool. You can connect to an Open SAFE model and get the Joint reactions for multiple Load combinations.Once you input your filter criteria , you can filter the Joints and even select them in SAFE. This will help you save a lot of time an efforts. Watch this tool to know more about this tool. Click Here to Download
Read more

Mu/Bd² Calculation Tool For Beams in ETABS | ETABS API Tool

Image
Many a times you need to preliminary size RCC Beams in ETABS. and to optimize the sizes you have to do a lot of trials. This task becomes difficult especially if you have a lot of Beams.  Sometimes you even have to consider the Equivalent Moments and Shears of the Beams in case the Beam is subjected to Torsion.  This tool will come very handy to you. It can quickly connect to an ETABS model and you can start exporting the Moments and Forces from ETABS and evaluate the Equivalent values and the Mu/Bd² values. Sizing your Beam based on Mu/Bd² would help you optimize the Beam size. You can sort the Beams or Even Filter these Beams as per your requirement. You can refer to this Youtube Video to Lean more about it and about how to use this tool. Start More Designing and avoid Laborious tasks. Click here to Download
Read more

ETABS Pier Spandrel LABEL

Image
Renumber Pier and Spandrel Labels in Just a few Clicks.                                                                                                                                       Click Here to Download
Read more